Load resistor for calibration of a Hipot tester
RL01-TOS
100,000円 （税込：110,000円）
- Load resistor for calibration of a Hipot tester
- Complies with UL1270, UL1409, UL1410, and others
カート機能が動くまでの
[yith_wcwl_add_to_wishlist]
Product Overview
This is a variable load resistor for checking the output voltage of “withstand voltage testers” used for withstand voltage testing on production lines, as described in UL1492, Section 125, Clause 2-1B1. (Also conforms to UL1270, UL1409, UL1410, etc.)
Notice of Paint Color Change
The paint color of the enclosure has been changed as shown in the figure, effective for shipments in September 2019. (2019.9)
Specifications
Specifications
Open in a new window
| Resistors | 120kΩ/ 159kΩ/ 210kΩ/ 279kΩ/ 369kΩ/ 489kΩ/ 648kΩ/ 858kΩ/ 1,137kΩ/ 1,500kΩ/ 1,989kΩ/ 2,148kΩ |
|---|---|
| Resistance Accuracy | +1%, -0% of nominal value when set to 120kΩ, ±1% of nominal value when set to other values |
| Maximum Operating Voltag | 1300V (continuous rating) |
| Maximum Overload Voltage | 1400V for 5 seconds (application may not be repeated within 1 minute) |
| Dimensions (MAX) | 200[7.87inch]W × 100[3.94inch]H × 260[10.24inch]Dmm (210[8.27inch]W × 120[4.72inch]H × 295[11.61inch]Dmm) |
| Weight | Approx. 2.6kg (5.73 lbs) |
| Accessories | TL04-TOS High-voltage test lead: 2, TL05-TOS High-voltage test lead: 1 |
Manual
RL01-TOS
