Harmonics Analyzing Suite Ver 2.6.0 (for KHA3000 only)
The “SD006-KHA, Harmonics Analyzing Suite” can remotely control the “KHA3000, Harmonic/Flicker Analyzer” from the PC, and acquire the test result file of the harmonic current test. And it also can analyze the test result file. The LIN1020JF/3020JF and PCR-LE/LE2/LA/L can be also controlled remotely.
This dedicated application software consists of 3 programs. Using this software, you can set test conditions and control the execution of tests. You can also control the AC power supply (PCR-LE) used for tests. Furthermore, you can print the harmonic spectrum, and current and voltage waveforms on your reports.
Program configuration of SD006-KHA Harmonics Analyzing Suite and SD005-KHA Harmonics Explorer
Offers functions to set conditions for harmonic current tests and voltage fluctuation tests, read test conditions, execute tests and save and display test result data.
Test condition setting
Start/stop of test
Retrieval of test result files
Display of measured values
Control of AC source PCR-LE
Entry of comments
Report printing
HA File Analyzer 3
HA File Analyzer
Offers functions to analyze harmonic test data.
Display of test result list
Display of graphs (V/I waveforms, 2D harmonics, 3D harmonics, vectors, current trend, harmonic trend and THC trend)
Saving of test result files in text format and repeatability check
Report printing
Vf File Analyzer 3
Vf File Analyzer
Offers functions to analyze voltage fluctuation test data.
Display of test result list
Display of test result list and display of flicker list
Display of graphs (dc%, dmax%, d(t) >3.3%) (CPF)
Saving of test result files in text format
Report printing
SD006-KHA
SD005-KHA
Specifications
HarmoCapture 3
HarmoCapture
Offers functions to set conditions for harmonic current tests and voltage fluctuation tests, read test conditions, execute tests and save and display test result data.
Test condition setting
Start/stop of test
Retrieval of test result files
Display of measured values
Control of AC source PCR-LE
Entry of comments
Report printing
HA File Analyzer 3
HA File Analyzer
Offers functions to analyze harmonic test data.
Display of test result list
Display of graphs (V/I waveforms, 2D harmonics, 3D harmonics, vectors, current trend, harmonic trend and THC trend)
Saving of test result files in text format and repeatability check
Report printing
Vf File Analyzer 3
Vf File Analyzer
Offers functions to analyze voltage fluctuation test data.
Display of test result list
Display of test result list and display of flicker list
Display of graphs (dc%, dmax%, d(t) >3.3%) (CPF)
Saving of test result files in text format
Report printing
HarmoCapture 3 / HarmoCapture
HarmoCapture 3 / HarmoCapture lets you control KHA Series remotely from a PC in the same way you control it from the operation panel of the device. The program will start as appropriate for the test mode.
Test condition setting items for harmonic current tests.
Setting the wiring method
Limit Standard
Measurement Technology Standards
Voltage range
Current range
Designation of input terminal
Nominal Voltage
Nominal frequency
Pst measurement time
Number of Pst measurements
dmax limit
Flicker Margin
d Margin
Judgment limit value
Nominal Voltage
Nominal frequency
d Measurement time
d測定回数
dmax limit
d Margin
Judgment limit value
Nominal Voltage
Nominal frequency
Pst measurement time
Number of Pst measurements
Test impedance
Judgment limit value
Common Item Settings
When Pst Auto is selected
When manual switching is selected
IEC61000-3-11 Ed1.0
Setting the wiring method
Limit Standard
Measurement Technology Standards
Voltage range
Current range
Designation of input terminal
Nominal Voltage
Nominal frequency
Pst measurement time
Number of Pst measurements
dmax limit
Flicker Margin
d Margin
Judgment limit value
Nominal Voltage
Nominal frequency
d Measurement time
d測定回数
dmax limit
d Margin
Judgment limit value
Nominal Voltage
Nominal frequency
Pst measurement time
Number of Pst measurements
Test impedance
Judgment limit value
HA File Analyzer 3 / HA File Analyzer
HA File Analyzer 3 / HA File Analyzer are application programs that allows you to analyze the data in the test result files (xxx.hr3 / xxx.hr) saved by HarmoCapture 3 / HarmoCapture. It is not necessary to connect with KHA Series to run, so, you can analyze test data anywhere you want.
Lists the test results file for the harmonic current test.
Graph and Data Pane
Displays a graph of test results file for the harmonic current test.
Results List Pane
Lists the test results file for the harmonic current test.
Graph and Data Pane
Displays a graph of test results file for the harmonic current test.
Results of repeatability checks
Displays the decision results between the files in the result list, as well as the decision results for each order. Files can be compared from 2 to a maximum of 15 files.
Save test result files as text
Test result files can be used in Microsoft Excel or as text for use in other application software.
Report printing of test result files
Reports (PDF) can be printed from test result files saved by the KHA series or HarmoCapture 3/HarmoCapture.
Vf File Analyzer 3 / Vf File Analyzer
VF File Analyzer 3 / VF File Analyzer are application programs that allows you to analyze the data in the test result files (xxx.vr3 / xxx.vr) saved by HarmoCapture 3 / HarmoCapture. It is not necessary to connect with KHA Series to run, so, you can analyze test data anywhere you want.
Displays the voltage fluctuation waveform of each measurement time. Each measurement time is connected together along the time axis. The vertical axis represents the voltage ratio with respect to the nominal voltage in terms of a percentage. The horizontal axis represents the elapsed time in unit of seconds. Test data A and B are displayed simultaneously.
Test Results / Set Value List Pane
Displays the test results list and test conditions. The judgment result of each segment and the final judgment over all the measurement times are displayed. You can click the tab to switch between the test results list and test conditions data displays. Select test data A or B to be displayed.
CPF Waveform Display Pane
Displays a graph of the CPF (cumulative probability function). You can view the probability distribution of voltage fluctuations. Select test data A or B to be displayed.
Total Measurement Time Waveform Display Pane
Displays the voltage fluctuation waveform of each measurement time. Each measurement time is connected together along the time axis. The vertical axis represents the voltage ratio with respect to the nominal voltage in terms of a percentage. The horizontal axis represents the elapsed time in unit of seconds. Test data A and B are displayed simultaneously.
Test Results / Set Value List Pane
Displays the test results list and test conditions. The judgment result of each segment and the final judgment over all the measurement times are displayed. You can click the tab to switch between the test results list and test conditions data displays. Select test data A or B to be displayed.
CPF Waveform Display Pane
Displays a graph of the CPF (cumulative probability function). You can view the probability distribution of voltage fluctuations. Select test data A or B to be displayed.
List of test results when manual switching is used.
The ‘voltage change caused by manual opening and closing’ specified in IEC 61000-3-3 A1 (2001) Annex B is determined by taking the arithmetic mean of 22 measurements, excluding the largest and smallest of the measurements obtained from a maximum of 24 measurements.
Save test result files as text
Test result files can be saved as text for use in Microsoft Excel or for use in other application software.
Report printing of test result files
Reports (PDF) can be printed from test result files saved by the KHA series or HarmoCapture 3/HarmoCapture.
Operating environment
Personal computer with Microsoft Windows 11 or 10 or 7 (32-bit or 64-bit)
At least 2 GB of memory (4 GB or more recommended)
1024 x 768 dots or higher resolution
20 GB or more free hard disk space (more space required for saving data)
CD-ROM drive
Mouse or other pointing device
VISA libraryNI-VISA 4.1 or later; Keysight IO Libraries Suite 14.1 or later; or KI-VISA 4.2.2 or later
USB cable (when using USB)
GPIB card and IEEE488 cable (when using GPIB)
Cross serial cable (when controlling AC power supply via RS232C)
CompactFlash Type I (CFA), up to 512 MB (when using KHA3000 files)
Cookies will be used to track which website is being visited. On our website, we certify the information that can be accessed by visitors using cookies. We also track viewed information by users to understand your interest and provide you with a better content. You will be able to disable cookie itself, you may choose the way to use personal identification whenever you use service that requires authentication.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
Additional Cookies
This website uses the following additional cookies:
(List the cookies that you are using on the website here.)
Please enable Strictly Necessary Cookies first so that we can save your preferences!