| Environment | Operating temperature range | 0°C to 40°C (32°F to 104°F) |
|---|---|---|
| Operating humidity range | 20 % – 85 % RH (without condensation) | |
| Storage temperature range | -25°C to 70°C (-13 °F to 158 °F) | |
| Storage humidity range | 90 % RH or less (without condensation) | |
| Input voltage range | 100 VAC – 240 VAC (90 VAC – 250 VAC) Single phase, continuous | |
| Input frequency range | 47 Hz – 63 Hz | |
| Power | 200 VAmax | |
| Inrush current | 35 A | |
| Insulation resistance | Primary – input terminal Primary – chassis Between input terminals and chassis | 500 VDC, 30 MΩ or more (ambient humidity of 70 % RH or less) |
| Withstanding voltage | Primary – input terminal Between primary and chassis | No abnormalities at 1500 Vac for 1 minute. |
| Weight | Approx. 24 kg(52.91 Ib) | |
| Accessories | Power cord: 1 (wire length 2.4 m), load input terminal cover: 2 (with auxiliary band), load input terminal screw set: 2 pairs (bolt, nut, spring washer), heavy duty warning seal: 1 sheet, operating instructions: 1 booklet | |
| Safety *1 | Complies with the requirements of the following directive and standard. IEC61010-1:2001(Class I *2 , Pollution degree 2 *3) | |
*1 Does not apply to specially ordered or modified PLZ-4Ws. *2 This is a Class I equipment. Be sure to ground this product’s protective conductor terminal. The safety of this productis only guaranteed when the product is properly grounded. *3 Pollution is addition of foreign matter (solid, liquid or gaseous) that may
