| Model | PLZ164W | PLZ334W | PLZ1004W | PLZ164WA | PLZ664WA | |
|---|---|---|---|---|---|---|
| Elapsed time display | Measures the time from load on to load off. On/Off selectable. | |||||
| Measures from 1 s up to 999 h 59 min 59 s | ||||||
| Auto load off timer | Automatically turns off the load after a specified time elapses. | |||||
| Can be set in the range of 1 s to 999 h 59 min 59 s or off | ||||||
| BNC connector | Trigger output | Trigger output: Approx. 4.5 V, pulse width: Approx. 2 μs, output impedance: Approx. 500 Ω Outputs a pulse during sequence operation and switching operation. | ||||
| Current monitor output | 1 V f.s (H or L range) and 0.1 V f.s (M range) | |||||
| Communication function | GPIB | IEEEstd.488.1-1978 SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, and E1 Supports the SCPI and IEEE std. 488.2-1992 command set Sets panel functions except the power switch and reads measured values | ||||
| RS-232C | D-SUB 9-pin connector (conforms to EIA-232-D) Sets panel functions except the power switch and reads measured values Supports the SCPI and IEEE std. 488.2-1992 command set Baud rate: 2400, 4800, 9600, 19200 bps Data length: 8-bit, Stop bit: 1, 2-bit, Parity bit: None, Flow control: Xon/Xoff | |||||
| USB | Conforms to USB 2.0 Specifications and USBTMC-USB488 Device Class Specifications Sets panel functions except the power switch and reads measured values Communication speed 12 Mbps (Full speed) | |||||
