Cable length: 1.5m Maximum operating voltage: 10kV

Factory Option LAN InterfaceThis series is compatible with IEEE488.2 as well as SCPI commands. Downloading the instrument drivers (available on our website) allow for complete control with Excel VBA and LabVIEW, as wel as sequence control with our proprietery sequence creation software, Wav...

3-core cabtyre cable3m 8sq M5 for SR

USB InterfaceThis option is also available for the multi-output model (PCR-LE2).

Conversion cable for RS-232C controlD-sub 9P - RJ45, total length: 2m

Terminal unit (for use with the PMC-A series)

Sensing cable set for OP03-PFX (CE compliant) Test lead for 8-point cell voltage measurement Total cable length 3 m Maximum operating temperature: 105°C Sample side tip cut-off The CE marked products PFX2512 / 2532

Compatible with all PAT-T series models. Frame and handle kit with castors.*PAT-T series main unit is not included.

Compatible with PXB20K-50Length : 3mMaximum allowable current：800ATerminal size：M12/M12

For PCR18000WEA2R (three-phase 3-wire 400 V input)

For PCR24000WEA2R (three-phase 3-wire 400 V input)

Three-phase input power cordLength : 3mNominal cross-sectional area : 22mm2Terminal size：M6

Load cable Length : 3m Maximum allowable current : 200A Terminal size：M10/M10

Parallel operation signal cable

The device is designed to perform high-voltage tests onavionics equipment.Thanks to the built-in step-up transformer,it can handle 360 V DO-160 abnormal tests. Maximum output voltage: 440 Vrms Input voltage range: 100 V to 320 Vrms Input voltage conversion ratio: Input [1] : Output [1.34] Freque...

Parallel operation cable for SPEC71200

AC Cable for SPEC71200

Output cable (with connector): AWG10(equivalent to 5.5 mm2), cable length: approx. 5 m Voltage sensing cable (with connector): AWG24, cable length: approx. 5 m Thermocouple: AWG24, T type, Teflon, wire diameter: 0.32 mm2, cable length: approx. 5 m Cable ties: 10 pcs.

Output cable (with connector): AWG10(equivalent to 5.5 mm2), cable length: approx. 2 m Voltage sensing cable (with connector): AWG24, cable length: approx. 2 m Thermocouple: AWG24, T type, Teflon, wire diameter: 0.32 mm2, cable length: approx. 3 m Cable ties: 4 pcs.

Load cables for high voltages up to 80 A (our recommended current). Length: 3 m, Max: 2000 V/ 80 A, Thickness: 22 mm2

Factory OptionThe variable internal resistance feature enables you to easily simulate the internal resistance of rechargeable batteries, solar batteries, fuel cells, and the like. By setting the internal resistance value in constant voltage (CV) mode, you can decrease the output voltage according...

Factory OptionThe variable internal resistance feature enables you to easily simulate the internal resistance of rechargeable batteries, solar batteries, fuel cells, and the like. By setting the internal resistance value in constant voltage (CV) mode, you can decrease the output voltage according...

M8 terminal connection kit

Parallel operation kit (for 2 units)

Parallel operation kit (for 2 units)

Parallel operation kit (for 2 units)

Connector kit

For PCJ75KT/PCJ100KT/PCJ150KT/PCJ200KT

For PCJ30KT

8ch Cell Voltage Measurement Option Set 8 points of cell voltage can be measured with one board (isolation between channels) Four sets of ‘measurement board’, ‘dedicated filter board’ and ‘test leads (5 m) for 8 channels’.

Sensing cable set (for OP03-PFX) Test lead for 8-point cell voltage measurement Total cable length 5m Maximum operating temperature: 105°C Sample side tip cut-off PFX2512 / 2532

Voltmeter Unit PFX2512 / 2532By installing an Voltmeter Unit OP03-PFX in an option slot on the SL01-PFX, you can increase the number of voltmeter measurement points. If OP03-PFX units are installed in all option slots of the SL01-PFX, voltage measurement points can be expanded to 64 points.

8Slot UnitPFX2512 / 2532

Lead wires for voltage and thermometer units for 4 cells K-Type Thermocouple Length: 5m

Voltage/thermometer unit PFX2512 / 2532

Voltage/thermometer unit PFX2511