SD008-PFX2400

SD008-PFX2400

$1.600,00 (税込:$1.760,00

  • Application Software for PFX2400 series
  • CPChecker2400 / CPChecker2400 Plus
outgoing_mail Request for Quotation

What is myKIKUSUI?

SKU: SD008-PFX2400
  • Features

Outline

Centralized management by PC is capable of setting the test

The SD008-PFX2400 package contains following three application software.

CPChecker2400

Using the PFX2400 series with this application software, you can create test conditions for the cycle test, voltage hold test and charge/discharge efficiency test and execute the tests. An operation panel is provided independently for each channel, and individual test per channel can be executed. For setting the test conditions, selections for JIS D 1401 and JIS C 5160 are provided. You can easily set the capacitor test conditions based on the JIS. The test results are saved in text files (CSV format); so it can be used with other spreadsheet software.

各チャンネル独立
試験条件を設定
  • Multi-channel control*1
  • Channel number assignment
  • Test condition configuration and saving
  • Test start, stop, pause, and alarm reset
  • Test result display
  • Test result file creation and saving (CSV format)
  • Measured value monitoring (charge and discharge current, terminal voltage, and reference electrode voltage)
  • HOVP/HUVP voltage display
  • Rest hold

*1 The number of channels that can be controlled varies depending on the data acquisition interval. For example, if a test cycle is 600 s, up to 96 channels can be controlled under the following conditions.
ΔV: 0.5 % of the charge-discharge voltage
ΔI: 0.5 % of the charge-discharge current
ΔT: 10 s
The maximum number of 12 channels that can be displayed on the screen.

CPChecker2400 Plus

CPChecker2400 Plus

CPChecker 2400 Plus is software that graphs the test data that was created by CPChecker 2400 on the screen or printing. In addition to the test data graphs, it can also display the test data values, electrostatic capacities, and other values calculated from the test data, making a range of data analysis possible.

  • Graph display and graph overlay for each test cycle
  • Display of test data acquired with CPChecker 2400
  • Display and printing of transition graphs for all cycles
  • Recalculation of the initial internal resistance and internal resistance following changes to the calculation conditions

IP Configuration Tool *2

IP Configuration Tool

The IP Configuration Tool is to set the IP address and channel number of the Capacitor Tester PFX2411. The IP address*3and channel number can be changed by this software.

  • IP address:192.168.0.0 to 192.168.255.254
  • Channel number: 0 to 256

*2 When using only 1 unit of the PFX2400 series, IP Configuration Tool is not required.
*3 When IP Configuration Tool is not used, it is necessary to set the IP address and subnet mask of the personal computer with which CPChecker2400 is used according to the range of IP address of the PFX2400 series.

System requirements

CPChecker2400 and CPChecker2400 Plus

  • PC running Microsoft Windows XP Service Pack 3 or later, Windows Vista, Windows 7, or Windows 8
  • Microsoft Windows Installer 3.1 (may need to be installed on Windows XP; included on the CD)
  • Microsoft .NET Framework 3.5 SP1 (included on the CD)
  • Microsoft Chart Controls for Microsoft .NET Framework 3.5 (included on the CD)
  • 2 GB or more of memory
  • Monitor with a resolution of 1280 x 1024 dots or higher
  • 100 MB or more of free hard disk space (the amount of additional space that is needed depends on the type of data you need to save)
  • CD-ROM drive
  • Mouse or other pointing device
  • 10BASE-T or 100BASE-TX LAN port

IP Configuration Tool

  • PC running Microsoft Windows XP Service Pack 3 or later, Windows Vista, Windows 7, or Windows 8
  • Microsoft Windows Installer 3.1 (may need to be installed on Windows XP; included on the CD)
  • Microsoft .NET Framework 3.5 SP1 (included on the CD)
  • 256 MB or more of memory
  • Monitor with a resolution of 1024 x 768 dots or higher
  • CD-ROM drive
  • Mouse or other pointing device
  • 10BASE-T or 100BASE-TX LAN port

Others

  • LAN cables (the number of straight cables required is the number of PFX2400 channels that you want to use and one straight cable for the PC) *
  • Switching hub (the minimum number of ports required is the number of PFX2400 channels that you want to use and one port for the PC)
  • PFX2400 Series
  • Adobe Reader 6 or later (required to view the PDF version of the operation guide)

* If you only need to use one channel without a switching hub, you can connect the PFX2400 Series directly to a PC using a crossover LAN cable.

お気軽にご質問・ご相談ください

製品カタログダウンロード一覧を見る
導入検討中・見積り依頼メールで問い合わせる
close

Search

Search for articles on this site

Search for Products.  サポート記事から検索