| Item/Model | PBZ20-20A | PBZ20-20 | PBZ40-10 | PBZ60-6.7 | PBZ80-5 | |
|---|---|---|---|---|---|---|
| Common specifications | Software protocol | IEEEStd 488.2-1992A | IEEEStd 488.2-1992 | |||
| Command language | Complies with SCPI Specification 1999.0 | |||||
| RS232C | Hardware | Complies with the EIA232D specifications. D-SUB 9-pin connector (male) *1 Baud rate: 1200, 2400, 4800, 9600, 19200, and 38400 bps Data length: 7 bits or 8 bits. Stop bit: 1 bit or 2 bits. Parity bit: None. Flow control: X-flow or none. | ||||
| Program message terminator | LF during reception, LF during transmission | |||||
| GPIB | Hardware | Complies with IEEE Std 488.1-1987 SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, and E1 24-pin connector (receptacle) | ||||
| Program message terminator | LF or EOI during reception, LF + EOI during transmission | |||||
| Primary address | 1 to 30 | |||||
| USB | Hardware | Complies with the USB 2.0 specifications. Data rate: 12 Mbps (full speed). Socket B type | ||||
| Program message terminator | LF or EOM during reception, LF + EOM during transmission | |||||
| Device class | Complies with the USBTMC-USB488 device class specifications | |||||
| LAN (factory option) | Hardware | IEEE802.3 100Base-TX/10Base-T Ethernet IPv4, RJ-45 connector *2 | ||||
| Complies with the LXI 1.4 Core 2011 | ||||||
| Communication protocol | VXI-11, SCPI-RAW | |||||
| Program message terminator | LF or END during reception, LF + END during transmission | |||||
* 1. Use a cross cable (null modem cable). * 2. Category 5; use a straight cable.
