KRB3-TOS

High power density: 20 kW in 3U A single unit supports both power and regeneration Rated output voltage: 50 V/ 250 V/ 500 V/ 1000 V/ 1500 V Select a model with an input voltage from 200 Vac (3-phase) or 400 Vac (3-phase) Continuous operation at rated power at ambient temperature of 50°C(Excludin...

Waveform generation function Sequence function Synchronized operation function(Trigger-based, Clock-based) Parallel operation function (Applied to the same model for 2 units in parallel connection) Unipolar mode High-speed response Low ripple noise(CV mode)

Low-noise, high-efficiency soft-switching system. 19 inches wide Power factor correction circuit (power factor 0.95%) to reduce power consumption Excellent cost performance Continuous full-load operation at ambient temperatures as high as 50°C High noise resistance. 4 kW types operable wi...

Maximum 20 kW output in a 3U size Supports a maximum voltage of 1500 V Bleeder ON/OFF function Output ON/OFF delay function Continuous full-load operation at ambient temperatures as high as 50°C Up to 25 units (500 kW) can be operated in parallel*Please consult with us if you would like to use 1...

20kW rated power in 3U Maximum operating voltage of 1500 V Operating modes: CC, CR, CV, CP Up to 25 units (500 kW) can be operated in parallel*Please consult with us if you would like to use 10 or more units in Parallel operation. Equipped with a touch panel display Pre-charge function I-V chara...

Maximum voltage: 60.0000 V / Maximum current : 200.0000 A Capable of seamless charging/discharging (high-speed charging/discharging transfer control) Can accurately measure not only voltage and current but also integrated capacity and electric power Built-in 10,000-step pattern charge/discha...

Sequence function (supports triggered synchronization) Variable internal resistance function LAN (LXI compliant) /USB/RS232C as standard interface A virtual multi-channel bus (VMCB) function makes multi-channel operation more efficient A wide range of voltage and current settings can be com...