This product has been discontinued.

PIA4810

PIA4810

100,000 (税込:110,000

  • Capable of controlling various power supplies and electronic loads.
  • Supports multiple channels via a highly extensible slot-in system.
  • Equipped with a high-speed serial communication function.

Request for Quotation Save to myKIKUSUI

Out of stock

SKU: PIA4810
  • Features
  • Dimensions
  • Options
  • Downloads

Outline

Supports multiple channels via a slot-in.

PIA4820

The PIA4810 is a power supply controller capable of analog and digital control. It is equipped with the GPIB and RS232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled. Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PMR Series, can be directly connected to the PIA4810 via a TP-BUS (twisted pair bus), enabling a maximum of 31 channels to be controlled digitally.

Connection Diagram

Example of connection 1

Power supply control system for 2 to 8 channels using one PIA4810

Example of connection 1

Example of connection 2

Power supply control system for 32 channels per one GPIB address using one PIA4810 and three PIA4820s

Example of connection 2

Example of connection 3

Power supply control system in which a power supply is directly connected to the system between two PIA 4820s (combination with power supply and power supply controllers)

Example of connection 3

Example of connection 4

Power supply control system using one PIA4830 (controls up to of 31 channels)

Example of connection 4
  • When the power supply control system in “Example connection 2” is provided as a basic configuration, the additional use of GPIB addresses allows it to control a maximum of 448 channels. (32 channels x 14 addresses = 448 channels)
  • The only models that can be directly connected for control to a power supply controller via a TP-BUS, as in “Example connection 3” or “4”, are DC power supplies with a digital remote-control function.
  • When the power supply control system in “Example connection 4” is provided as a basis, the additional use of GPIB addresses allows it to control a maximum of 448 channels. (32 channels x 14 addresses = 448 channels) It is also possible to construct a system with the same connections using the PIA4810. Note:For PMR Series,up to 434 can be controlled. (31 channels x 14 addresses = 434 channels)
  • It is limited to use a TP-BUS for connecting up to 3 units of PIA4820. In case, If you wish to connect more than three PAI4820s, please consult with KIKUSUI.
  • The total extension length of the TP-BUS for connection is up to 200 m.
  • For advice on other connections, please consult with KIKUSUI.

Specifications

Dimensions(mm)

PIA4800 Series

Downloads

Product Catalog

Operation Manuals

PIA4810 / PIA4820
Icon

    Updater / Driver

    Please feel free to contact us with any questions or concerns.

    Download a Product Catalog View List
    Request a Quotation Contact Us
    close

    Search