KHA3000 – Firmware Updater

未設定メニュー

Firmware Updater

This software is to update the firmware version of the KHA3000.

Ver.

3.52

Last update

2023/7/07

Configuration

  • A compact flash card (CF card) of 512MB or less is required for the update.
  • To copy files to a CF card, you will need a PC with Windows 2000 or later operating system.
  • If you have KHA3000 Ver.2.9 or earlier, you cannot update the firmware by yourself. The firmware update will be not free of charge, but if you need it please contact us or Kikusui agent.
  • If you are using SD006-KHA(Harmonics Analyzing Suite), it is necessary to update SD006-KHA to the latest version. Please update the application software by downloading it from here.
  • The application software is not compatible with Windows XP and previous operating systems. Please check your operating system before updating.

Download

Release Note

VER 3.52
2023-6-09

KHA3000 firmware

Resolved issues
Fixed the issue of incorrect reference destination of the value used to judge the voltage rms value for checking the AC power supply for IEC 61000-3-12.
Resolved issues
Fixed the issue where after loading an IEC 61000-3-12 test results file, the front panel displayed measured values instead of analysis data.
Resolved issues
Fixed the issue where a test for IEC 61000-3-11 could not be run.
Resolved issues
Fixed the issue of incorrect display when “EXT” is selected as the PLL source.
VER 3.51
2022-5-30

KHA3000 firmware

Resolved issues
Fixed the issue that an error occurs in the measured Σ values (Total Values) when a large current change occurs immediately after the analysis is completed.
VER 3.50
2022-1-06

KHA3000 firmware

Improvement
Complied with the following standards: IEC 61000-3-2 Ed5.0(2018), EN 61000-3-2 (2019), JIS C61000-3-2 (2019), IEC 61000-3-3 Ed3.1(2017), EN 61000-3-3 (2013)/A1(2019)
Resolved issues
Corrected the judgment of the power supply quality check function (AC power supply check function) according to the standards-Judgment of crest factor value, In IEC 61000-3-2, it has been modified from “applied to all classes” to “not applied to Class A/B”, In JIS C61000-3-2, it has been modified from “applied to all classes” to “not applied to Class A/B”, - Judgment by harmonic current of each order, In IEC 61000-3-12, the measurement during the test was modified to be measured at no load (before the test)

 

Firmware update guide

Last update

2022/1/21

Configuration

Adobe Reader

Please feel free to contact us with any questions or concerns.

Download a Product Catalog View List
Request a Quotation Contact Us
close

Search